Topside Fuel Tank 102L

Universal stationary tank, located on the upper side of the inspection hatch, through which easily produce an internal examination of the tank and cleaning it.
On the cover hatch are adapters to attach the riser of the fuel hose and fitting of ventilation pipe, filler-hole, standard Mount for mounting the sensor level hole with standard thread 1/4 NPT fitting for installation reverse draining fuel. Filler cap equipped with air bleeder.
Made of high density plastic, so fuel with aggressive admixtures do not damage the tank.

When you install some of the fuel gauges may require an additional seal.

For this tank following suitable level sensors:
• 66180C-fuel level sensor for tanks with a height of 20-60 cm
• JS60062-350 mm gauge 0-190 Ohm (euro)
• JS60341-350 mm gauge 240-33 Ohms (US)

When you install the connector, the vent tube the fuel supply must be used to link gasoline-resistant sealer. Also not recommended increased delay elements since it would lead to the conclusion of order threads in plastic elements and would not allow compaction work!