Main characteristics
- Manufacturer: CAN-SB
- Country of Manufacturer: Italy
Fuel tank 40 liters stationary/portable, 0,28x0,5x0,4m
Item code: SE2020
|
Characteristics |
|
| Material | High-density polyethylene |
|---|---|
| Capacity | 40 l |
| Length | 500 mm |
| Width | 400 mm |
| Height | 280 mm |
| Fuel connector Ø | 11 mm |
| Filler-hole, Ø | 47.5 mm |
| Vent fitting, Ø | 17/19 mm |
| Optimal height for fuel level sender | 275 mm |
| Weight | 4000 g. |
| Manufacturer | CAN-SB |
| Country of Manufacturer | Italy |
Description
Universal stationary fuel tank can be used as portable thanks to handles.
On the top side of the tank is an inspection hatch through which easily produce an internal examination of the tank and cleaning it. On the cover hatch located adapters "herringbone" to attach a fuel hose and fitting of ventilation pipe, filler-hole, standard Mount for mounting the sensor level hole with standard thread 1/4 NPT fitting for installation reverse draining fuel. Filler cap equipped with air bleeder.
Made of high density plastic, so fuel with aggressive admixtures do not damage the tank.
On the top side of the tank is an inspection hatch through which easily produce an internal examination of the tank and cleaning it. On the cover hatch located adapters "herringbone" to attach a fuel hose and fitting of ventilation pipe, filler-hole, standard Mount for mounting the sensor level hole with standard thread 1/4 NPT fitting for installation reverse draining fuel. Filler cap equipped with air bleeder.
Made of high density plastic, so fuel with aggressive admixtures do not damage the tank.
Note
For this tank will fit the following level sensors:
• 66180C-fuel level sensor for tanks with a height of 20-60 cm
• JS60060-275 mm gauge 0-190 Ohm (euro)
• JS60339-275 mm gauge 240-33 Ohms (US)
When you install some gauges require additional gasket.
• 66180C-fuel level sensor for tanks with a height of 20-60 cm
• JS60060-275 mm gauge 0-190 Ohm (euro)
• JS60339-275 mm gauge 240-33 Ohms (US)
When you install some gauges require additional gasket.
Important
When you install the connector, the vent tube the fuel supply must be used to link gasoline-resistant sealer. Also not recommended increased delay elements since it would lead to the conclusion of order threads in plastic elements and would not allow compaction work!
Tell about product
Share your opinion about this item, it may help to other customers.
Related items
-
US $31.81 -
US $31.81 -
US $24.90 -
US $23.42 -
US $34.75 -
US $2.21 -
US $4.47 -
US $5.07 -
US $4.38 -
US $5.53 -
US $11.48 -
US $21.82 -
US $22.11
-
Technical support service
Service of call center is available 24 hours a day. You can ask any questions from technical one to questions about ordering.
-
Warranty for all items
Warranty for all items is from 6 months to 3 years. In case of any defect we replace products without any problems.
-
Safe payment methods
You can pay via Credit / Debit card, PayPal or bank transfer.
-
Shipping all over the world
You may choose delivery by courier, post service or from pickup point.
-
Delivery control
We will pack your order carefully, hand to delivery company and track it till the moment of receipt.